When it comes to buying wholesale carpet, one of the most important steps before installation is getting the measurements right. Proper measurements help you save money, avoid waste, and ensure a smooth installation process. Whether you’re carpeting a single room or an entire property, this guide will walk you through how to measure accurately so you can confidently purchase your wholesale carpet.
Why Accurate Measurement Matters
Buying carpet at wholesale prices already gives you a cost advantage, but incorrect measurements can quickly turn your budget-friendly project into a costly one. Measuring too little means delays and possible mismatched dye lots. Measuring too much means paying for excess carpet you don’t need. That’s why taking the time to measure properly is crucial.
What You’ll Need
Before you begin, gather a few basic tools:
- A tape measure (preferably 25 feet or longer)
- A calculator or mobile phone
- Graph paper or a sketch pad
- A pen or pencil
Step 1: Draw a Simple Floor Plan
Start by drawing a rough layout of the room(s) you’ll be carpeting. It doesn’t need to be perfect, but it should reflect the general shape of the space, including closets, hallways, or nooks that require carpet. Label each area clearly.
Step 2: Measure the Length and Width
Using your tape measure, record the length and width of each room or area. Always measure to the longest point in each direction, even if the room isn’t perfectly square. Round up to the nearest half foot to ensure extra coverage.
For example, if a room measures 11 feet 8 inches by 14 feet 3 inches, round up to 12 feet by 14.5 feet.
Step 3: Calculate the Total Square Footage
To determine the square footage of each space, multiply the length by the width. Then add together the totals for each room to get the total square footage of carpet you’ll need.
Formula:
Length (ft) × Width (ft) = Area (sq ft)
Repeat this for each area and sum them up to find the overall square footage.
Step 4: Account for Extra Carpet
It’s recommended to add 5–10% extra to your total square footage. This buffer helps accommodate:
- Pattern matching
- Trimming during installation
- Minor measurement errors
- Future repairs or replacements
So if your total calculated area is 900 square feet, adding 10% gives you 990 square feet.
Step 5: Check Carpet Roll Widths
Most wholesale carpet rolls come in standard widths like 12 feet or 15 feet. Knowing the roll width helps you or your installer plan the best layout with minimal seams and waste.
For oddly shaped rooms, closets, or stairs, it’s best to consult with a professional installer for precise cuts.
Final Thoughts
Getting accurate measurements is the foundation of any successful carpet installation project. By following these steps, you can confidently shop for wholesale carpet knowing exactly how much you need.
Ready to Order Wholesale Carpet?
If you’re looking for high-quality wholesale carpet with unbeatable prices and expert customer service, visit Fedco Floors. Whether you’re remodeling your home or upgrading a commercial space, we’re here to help you every step of the way. Contact us today for personalized support and flooring solutions that fit your needs and budget.
